SilverFast

Scanning Negatives on the Epson V700 by Harold Brown

Bhaga Video | Harold Brown
Bhaga Video | Harold Brown

I have been using my Epson V700 to scan slides for the past couple of months. I wrote a review of the scanner about 2 months ago. If you want to read the original article click here. I scanned a few pictures for that post on the V700 scanner, but not any negatives. Scanning negatives was one of the primary reasons I bought the V700 Photo Scanner so I figured I best get at it! Many people have stated that the negative holders feel cheap or flimsy, and I guess they do compared to the slide holder. So when loading in negatives make sure that you take your time and work on a flat surface. That should help prevent any damage from occurring.

The first negatives I scanned were the first ones I found in my storage compartment. I reached in and took out some of the envelopes and stopped at the first one that also contained the negatives. That turned out to be from a work Christmas party in December 1983. So they were just over 29 years old. The prints were stored with them and I did remember correctly that the color of the prints was muted and not very vibrant. I like my pictures to pop a little more so I was going to have to fix that. The negatives were in good condition, meaning never handled, stored in a dry place and flat, not curled.

The film was taken to a local drug store for processing on Dec 26, 1983 and was Kodak Kodacolor VR 100 (the label on the film is KODAK CP 100). The film was cut into strips of 4 and the Epson negative holders can hold a strip of 6. So that wasn't going to be a problem. When handling the film I used cotton gloves, and after mounting the negatives into the holder (KODAK CP 100 facing down towards the flatbed) I sprayed them with a compressed gas duster as the only cleaning I did. I then turned the scanner on and started SilverFast 8. From the research that I did and the few days that I used the demo software, I decided that SilverFast was the way to go for me. I really do not care about ease of use because what I need is something that works, not something that is easy. Believe me, SilverFast is much easier to learn than Photoshop. I was able to become comfortable with SilverFast in about 3 days working a couple hours each day. Since then, each day builds on the previous and now I am learning additional info about Silverfast at my leisure.

I scanned the first batch of negatives manually, and the second batch using the automatic features of SilverFast. In this case I found the automatic processing to do a very good job. I was happy with it, but of course nothing escapes Lightroom and Photoshop for the final result. I do not add sharpening during the scanning process. I save that for the processing I do in LR and PS. This post is really about the V700 and not any software that I use with it, so I will say that SilverFast has the CP 100 negative type film that I can select to tell it what type of film is being scanned.

Scanning Negatives on the Epson V700

What I found is that the final image from the scanned negatives look good, were well received when I shared them with my friends, and some were surprised that I had scanned them from negatives and not the actual print itself. As typical, the scanned negatives were a little soft on focus, but could be adjusted to a sharper image if necessary. Just be careful not to add too much, it is best to keep people on the softer side of a focus anyway! Many times I adjust a pictures lightness and darkness based on a person's hair. Trying to make sure it has some detail and the shading looks good. Skin tones needing to be correct is a no brainer so don't miss the boat there.

They say a picture is worth a thousand words, so here are some pictures that illustrate what I have discussed above.

Picture adjusted for exposure, color noise, and dust and dirt on negative
Picture adjusted for exposure, color noise, and dust and dirt on negative

Notice how the details of the blouse are brought out perfectly and the skin tones are pleasant as well. Just a little rosy color on the cheeks.

The next set of pictures shows the before and after scanned negative of Mr. Hunter as well as the scanned version of the actual picture from 1983. When scanning a picture you need to replace the white insert into the lid of the scanner (reflective scanning).

Scanning Negatives on the Epson V700
Side by side comparison in LR of the scanned negative
Side by side comparison in LR of the scanned negative
The colors in this picture are as printed in 1983
The colors in this picture are as printed in 1983

Naturally the above scanned photo could have color correction applied and the colors from the negative versions would be similar. The negatives were scanned at 3,200DPI and larger versions of the picture look very good.

Note: The scanned negative contained more information that what was actually printed in the picture in 1983. In this case the negative scan brought in more information which made a difference on many of the other prints from this set.

Hopefully the above information has been useful or has inspired you to scan in some of your old photographs and share them digitally with your friends.

Epson Perfection V700 Photo Scanner by Harold Brown

Bhaga Video | Harold Brown

I spent about 2 years debating what type of scanner I wanted to buy before purchasing the Epson Perfection V700 Photo Scanner. I even sent 50 slides to ScanCafe to see what the quality was from them. If you are interested, you can read my post about them. A service can be a great time saver if you have a large film and/or slide collection. I had a Microtek scanner that I bought in 2002 that desperately needed to be replace. Some recent scanning of color pictures finally drove me to decided to get the V700. I had the negatives, why was I scanning the picture! I did a lot of reading of scanner reviews before my purchase. Important to me was the Digital ICE technology and I like the SilverFast software that comes bundled with the scanner. I didn't want to spend half my life in Photoshop healing hair and dust off of my film, so a scanner and software that supported infrared was high on my list of must haves. I don't use it for every picture, but it is amazing how much dirt there actually is on the film. Be careful how aggressive you get with the infrared or you can impact the final picture quality. For handling film I have cotton work gloves that I use to keep the oil from my skin off of the film. In addition or as an alternative, using a compressed gas duster on the film and scanner bed helps control the dust problem. A very good investment when scanning. I use it to dust the outside of the scanner as well.

Epson Perfection V700 Photo Scanner

There were many other things I would love to have on the scanner, like auto focus or better film holders, but I also wanted to keep my price in the $500 range if possible. I ended up spending $636 on the V700 at Micro Center. Overall I would rate the quality of the scanner a close 5 out of 5. There is very little to complain about and even the film holders provide the ability to adjust the height to improve focus. I scanned 12 slides using the different height adjustments and found that the factory setup was the sharpest scan (arrow pointing to +). The light source isn't LED so there is a short warm-up time, but I am looking for output quality as a priority.

Epson Perfection V700 Photo Scanner

Here is what's in the box.

  • Epson Perfection V700 Photo scanner - with DIGITAL ICE technology
  • 8" x 10" transparency unit (built into lid)
  • Four film holders: 35mm negatives, 35mm slides, medium format and 4" x 5"
  • Film Holder Height Adjusters
  • 8" x 10" Film Area Guide
  • CD-ROM with Epson Scan software and productivity applications
  • DVD-ROM with Adobe® Photoshop® Elements 9
  • CD-ROM with LaserSoft Imaging™ SilverFast® SE6
  • USB 2.0 cable
  • Epson Setup Sheet
  • AC adapter and power cable

Epson Perfection V700 Photo Scanner

The scanner isn't worth much without the software and there is little purpose to have the scanner and not run the best software you can afford. The software it ships with is good and it may be all that you need. The first thing I did was to download the latest demo version of SilverFast 8 and made sure that it worked on my system and that I was comfortable with it. I spent about three days using the software and took advantage of their upgrade offer from version 6 to version 8 Ai Studio.

Using SilverFast 8 I currently scan to jpeg at 3,200 dpi. I have done some scans to tiff, but I will reserve that for photographs that I feel are of a special nature. Otherwise jpegs are fine for the scans. The software function in SilverFast I make the most use of is the Histogram. The scans on a flatbed scanner will never be perfect, but for my work as a serious photographer the investment was worth it.

Epson Perfection V700 Photo Scanner

Above is a scanned 35mm close-up picture I took of an electric meter in 1977 using a GAF 35mm camera.

Epson Perfection V700 Photo Scanner

Epson Perfection V700 Photo Scanner

The above picture was taken in Mohican State Park forest in August 1977. The flash fired, resulting in highlighting the foreground rocks and tripod. I scanned 39 slides from the camping trip to the park. I had forgotten about visiting the park until I scanned the slides.

Epson Perfection V700 Photo Scanner

Epson Perfection V700 Photo Scanner

The above picture had histogram adjustments only. No sharpening was applied to the image when it was scanned.

Epson Perfection V700 Photo Scanner

The same picture compared side-by-side to the raw scan and the adjusted finished product.

Epson Perfection V700 Photo Scanner

See the follow-up to this post about scanning negatives, click here.

Unlock your memories and find those old photos!